5G IIoT Manual
18. Modem
A comprehensive overview of the modem can be found under IIoT -> Modem. The console output displays detailed status information about the modem device, organized into several sections for easy readability. Below is an overview of the information provided:
- Signal Quality:Displays the current signal strength of the modem.
- General Information:
- Path: The path for the modem object.
- Device ID: A unique identifier for the device.
- Hardware Details:
- Manufacturer: The modem’s manufacturer.
- Model: The model identifier.
- Firmware Revision: Details of the firmware installed, including version and build date.
- Carrier Config: Configuration used by the modem for carrier connectivity.
- Supported Technologies: List of supported network technologies like GSM, UMTS, LTE, and 5G NR.
- Current Technologies: Technologies currently in use.
- Equipment ID: IMEI of the device.
- System Information:
- Device Path: Path in the device tree.
- Drivers: List of drivers handling the device.
- Plugin: Plugin used by the modem.
- Primary Port: The main communication port for the modem.
- Ports: List of all available ports, each with its role.
- Status:
- Lock Status: Indicates any SIM-related locks (e.g., sim-pin2).
- Unlock Retries: Available retries for various PIN/PUK codes.
- State: The connection state.
- Power State: Current power state (e.g., on/off).
- Signal Quality: Cached signal quality as a percentage.
- Network Modes:
- Supported Modes: Different combinations of allowed and preferred modes.
- Current Mode: The currently active mode and preferences.
- Bands:
- Supported Bands: List of radio frequency bands supported by the modem.
- Current Bands: Bands currently in use.
- IP Configuration:
- Supported IP Types: IPv4, IPv6, and dual-stack options.
- 3GPP Information:
- IMEI: International Mobile Equipment Identity.
- Enabled Locks: SIM locks enabled on the device.
- Operator ID and Name: Identifies the operator.
- Registration Status: Indicates the registration state.
- 3GPP EPS (Evolved Packet System):
- UE Mode of Operation: Current mode in use (e.g., csps-2).
- Initial Bearer IP Type: IP configuration used for the initial bearer.
- SIM Information:
- Primary SIM Path: Path of the active SIM.
- SIM Slot Paths: Indicates the slots and their status (e.g., active or inactive).
- Bearer Information:
- Paths: Paths to bearer objects for managing data connections.